Overview
The required finish, surface properties, and performance of concrete surfaces depend on their usage. Some types of work are done on smooth and uniform surfaces while others involve using surfaced materials and coatings. Getting the desired result is achievable with proper surface treatments and methods of construction, as well as applying the construction materials needed.
Surface-built materials and treatments enable improving the quality of the concrete surface by providing for a clean demoulding process, controlling the airstream, and reducing the humidity losses during the curing process. The mentioned means can be applied in precast concrete, architectural concrete, flooring, and the construction industry.
Main functions
- Improvement of the appearance and finishes of concrete surface.
- Minimization of surface porosity.
- Reduction of humidity losses during curing.
- Provision for clean demoulding and protection of shuttering.
- Availability of ornamental exposed aggregate finishes.
Applications
- Precast concrete elements and architectural structures.
- Concrete walls, columns, plates and slabs.
- Industrial and commercial floors.
- Ornamental concrete surfaces and decorative finishes.
Mould release agent
The process of applying release agents is done to the inner surfaces of the formwork before the concrete is poured. Release agents provide a barrier between the concrete and formwork, thus avoiding sticking the two together during the demoulding process.
With this, it becomes possible to achieve cleaner surfaces and to minimize the risk of damage, such as honeycombing and concrete sticking to the formwork due to insufficient release.
Moreover, choosing the right type of release agent also simplifies the removal of the formwork and helps to preserve the quality of the formwork so that it can be reused.
There are several popular release formulations offered by Sakshi Chem Sciences:
Each of these formulations has a particular target application based on the type of formwork and the desired surface finish.
Defoaming agent
During the process of mixing and placing concrete, it is possible to catch air in the mixture, making small bubbles. If these bubbles remain in the concrete after hardening, they may cause hollowness on the surface of the element. This problem can affect the final appearance of the concrete structure, especially in cases of architectural concrete, precast elements, and the overuse of smoothly finished surfaces.
In this case, defoaming agents can ease the way trapped air bubbles collapse during the process of mixing. This helps eliminate possible inequalities and improve the quality of the concrete structure.
Key benefits
- Prevent air bubbles from forming in concrete;
- Reduce the number of visible bubble marks on the surface;
- Make concrete smoother;
- Enhance the appearance for architectural and decorative designs.
Choose the product, dosage and method as the manufacturer recommends for your mix.
Both powder and liquid versions of defoaming agents may meet the expectations of developers and contractors depending on the recipe and way of application of materials. It is necessary to choose the right substance, dosage, and method according to the instructions or recommendations of the producer.
Curing agent
Concrete curing guarantees that the moisture necessary for cement hydration is preserved. If concrete is left to dry quickly due to wind, heat or dry conditions, it may result in shrinkage cracks and other imperfections.
To ensure that moisture loss through evaporation is slowed down, curing agents are used on freshly poured concrete to create a barrier between the material and the environment.
- Moisture retention: stops water loss from wet concrete
- Crack prevention: fewer shrinkage cracks
- Strength development: hydration can complete
- Time and labour: less regular watering
Application guidelines
- Timing: The curing agent should be applied according to the guidelines set by the manufacturer, usually following the finishing of the concrete surface.
- Application: The curing agent should be sprayed or spread uniformly in accordance with the product instructions to achieve proper surface coverage.
- Film Formation: The curing agent should be allowed to form a film without being disturbed.
Precautions
- Do not apply the product in adverse weather conditions such as rain.
- Check for compatibility of the product with subsequent coatings, floor systems, or surface treatments.
- Ensure that there is uniform application on all surfaces, including corners and areas that will dry quickly.
Please follow the product technical data sheet for dosage, application method, and curing instructions.
Surface retarder
Surface retarders are employed to produce decorative exposed-aggregate concrete surfaces. They achieve this by making sure that the cement paste at the surface of the concrete sets more slowly while the underlying concrete sets normally, which makes it possible to remove the unset cement paste from the surface when the proper moment arrives.
This technique has the ability to produce a natural, textured look, so no other decorative materials are required. It is widely used for paths, driveways, landscaping, and architectural surfaces.
The following is a popular surface retarder manufactured by Sakshi Chem Sciences.
Sodium Gluconate is used as a retarder in cement-based applications. It has the ability to be suitable for this application based on how it is formulated and how it is used.
Application considerations
- Timing: The retarding treatment must be applied at the appropriate stage to control the setting of the surface layer.
- Dosage: The quantity depends on the concrete mix, environmental conditions, and desired aggregate exposure.
- Uniform Application: Ensure even coverage to achieve a consistent surface finish.
- Environmental Conditions: Temperature and humidity can influence setting behaviour, so application should be adjusted based on site conditions and product recommendations.
Proper timing and controlled removal of the surface paste are important for achieving the intended exposed-aggregate finish. Always follow the manufacturer's technical guidance and conduct trials where necessary.
Related products
Frequently asked questions
What does a mould release agent do?
It is applied to the inner face of formwork before concrete is poured. It forms a barrier so concrete does not stick during demoulding, giving cleaner surfaces, lowering the risk of damage such as honeycombing and helping formwork last longer.
Why use a defoaming agent in concrete?
Air trapped during mixing and placing can leave small cavities on the hardened surface. A defoamer helps these bubbles collapse, giving fewer bubble marks and a smoother finish, especially for architectural and precast concrete.
What does a curing agent do?
It forms a barrier on fresh concrete that slows evaporation, so cement keeps the moisture it needs to hydrate. This helps reduce shrinkage cracks and supports strength development.
How does a surface retarder create an exposed-aggregate finish?
It slows the setting of the cement paste at the surface while the concrete below sets normally. The unset paste is then removed at the right time to reveal the aggregate.
Which surface improving products does Sakshi Chem Sciences offer?
The range includes ADDAGE BONDCOTE mould release agents, ADDAGE Defoamer Powder and Liquid, BONDCOAT CC and BONDCOATE CCARB curing agents, and Sodium Gluconate as a surface retarder.


